|Table of Contents|
Project Settings Configuration Changes
Starting from this EAP, configuration of issue trackers, versioned settings, custom charts, shared resources and third-party report tabs was moved from
<TeamCity Data Directory>/config/projects/<ProjectID>/pluginData/plugin-settings.xml to
<TeamCity Data Directory>/config/projects/<ProjectID>/project-config.xml file. The file now has the
<project-extensions> element which contains all of the above-mentioned project features.
Two-node Server Configuration
The TeamCity server can operate in two modes now: main TeamCity server (default mode) and build messages processor.
- the server started in the build messages processor mode handles all of the data produced by running builds (build logs, artifacts, statistic values), pre-processes it and stores it in the database and on the disk
- in a two-node installation the main TeamCity server handles all other tasks: user interface, VCS-related activity, management of agents, etc.
- both the main TeamCity server and the build messages processor require access to the same data directory (which must be shared if the nodes are installed on separate machines) and to the same database
- the URL where the build messages processor operates must be accessible by the agents and the main TeamCity server (occasionally the main TeamCity server also communicates with the build messages processor by HTTP)
First of all, ensure that both machines where TeamCity software will be installed can access the same TeamCity data directory in read/write mode. For large installations we recommend using NAS. It is possible to share the directory using NFS, or Windows share, although the performance of such installation can be worse.
<processor url> is the URL of the build messages processor. This URL must be accessible by both the agents and main server. If you do not have an HTTP proxy installed in front of the TeamCity servlet container and you did not change the port in the servlet container during the installation, then by default this URL will be:
http://<your host name>:8111/
Startup & shutdown
Both the main TeamCity server and build messages processor can be started / stopped using regular TeamCity scripts (
teamcity-server.bat, teamcity-server.sh) or Windows services.
The build messages processor uses the same approach to logging as the main server. You can check how the startup is doing in the <TeamCity installation directory>/logs/teamcity-server.log file. You can also open <processor URL> in your browser, there you should see regular TeamCity startup screens.
Enabling Build Messages Processor
If both the main server and build messages processor are up and running, you should see the Administration | Nodes configuration page on the main TeamCity server:
On this page you can also see how many builds are currently assigned to each node. If the build messages processor is enabled, eventually all of the running builds will be switched to this node.
Restarting Servers while Builds are Running
The build messages processor as well as the main TeamCity server can be stopped or restarted while builds are running there. If agents cannot connect to the build messages processor for some time, they will re-route their data to the main server. If the main server is unavailable either, agents will keep their data and re-send it once servers re-appear.
Upgrade & Downgrade
Both the main TeamCity server and the build messages processor must be of exactly the same version.
As usually with TeamCity, agents perform upgrade / downgrade automatically.
The TeamCity cleanup task runs on the main TeamCity server only. In a two-node configuration as well as in a single node configuration, it can work at the same time while the servers are handing handling data from the running builds.
Backup & Restore
Backup through TeamCity web interface can be done on the main TeamCity server only. Backup from the command line can be done on either the build messages processor or on the main TeamCity server.
Restore can be done on either of these nodes, but only if all of the servers using the TeamCity database and data directory are stopped.
- Only one build messages processor can be configured for the main TeamCity server.
- At the moment the build messages processor node does not support plugins.
Team Foundation Work Items Tracking
Since TeamCity 10, Team Foundation Work Items tracking is integrated with TeamCity. Supported versions are Microsoft Visual Studio Team Foundation Server 2010-2015, and Visual Studio Team Services.
In addition, resolved states in TeamCity can be customized by using the
teamcity.tfs.workItems.resolvedStates internal property set to
"Closed?|Done|Fixed|Resolved?|Removed?" by default.
- When configuring a cloud image, you can now select an agent pool for the newly created cloud agents. Previously all of them were placed in the default pool.
- Custom names for agent images are supported now. The names of virtual machines in VMware must be unique. When using the same image in different cloud profiles, to avoid possible conflicts, use the custom agent image name when configuring a cloud profile in TeamCity. This feature can be also useful with naming patterns for agents. When a custom agent image name is specified, the names of cloud agent instances cloned from the image will be based on this name.
- EBS optimization is turned on by default for all instance types supporting it.
TeamCity administrators can enable / disable email verification (off by default) on the Administration | Authentication page.
During the project import TeamCity will take verified emails into account. If there are two users with different usernames, but the same verified email, TeamCity will provide a possibility to merge these users.
Exclude Patterns for Artifact Paths
It is now possible to specify newline- or comma-separated paths in the form of
-:source [ => target] to exclude files or directories from publishing as build artifacts.
will tell TeamCity to publish all files except for
folder1 into the
Project-bound Agent Management Permissions
Earlier , granting agent-related permissions, like 'authorize' or enable were possible to grant 'enable' could be done only globally (for permissions were applied to all the agents on the server).
Now we introduce agent's project-related permissions which allow performing level permissions to perform a task on an agent, provided that affected are only the projects where the user has : a user must have a specific permission granted in a project.
A user can perform a task controlled by one of these permissions on all the agents belonging to some pool provided this permission is granted to the user in all the projects associated with this pool. For example, a user with "'Enable / disable agents associated with project" ' permission in some projects , can enable or disable agents which belong to the pools of the related projects (user needs to have if the permission is granted in all the projects associated with the pool)pools.
The newly added permissions are:
In new installations, these project-related permissions are added to the Project Administrator role. If you are upgradingAfter upgrade, no permissions changes are applied: , but you might want to review the permissions after upgrade. , e.g. You can consider removing the Agent Manager role inclusion from the Project Administrator role and add adding the above-mentioned permissions to Project Administrator role manually.
Administration | Tools page improvements
In previous versions of TeamCity you could install a couple of predefined tools to TeamCity agents via the Administration | Tools page. In addition to that you could manually distribute zip archives to agents if you place them into special place on disk.
In addition, some of the plugins, like NuGet had own place for uploading new versions to agents.
In this EAP we unified all these tasks under the single interface. Now, you can manage NuGet versions, install recent version of ReSharper command line tools, or upload an arbitrary tool in a zip archive - all from the same Administration | Tools page.
Flaky Test Detection
TeamCity now supports flaky test detection. A flaky test is a test that is unstable (can exhibit both a passing and a failing result) with the same code.
Flaky test detection is based on the following heuristics:
Note that is branches are configured for a VCS Root, flaky tests are detected for the default branch only.
New Create project / Create build configuration buttons
The new Create subproject and Create build configuration buttons have a drop-down now and you can select whether you want to create a project from scratch (manually), from URL, or using the popular version control systems GitHub.com and Bitbucket. When one of the latter two is selected, TeamCity offers to configure a connection to the VCS hosting for the current project. When the connection is configured, TeamCity displays the list of the available repositories with their URLs. All you have to do is select a repository URL and proceed with the configuration.
REST API Enhancements
- It is possible now to get help on locator usage by sending a request with "$help" string as a locator
- Project features are now exposed
- Order of projects and build configurations can now be changed via via via .../app/rest/projects/xxx/order/projects and .../app/rest/projects/xxx/order/buildTypes requests
- It is now possible to get and update TeamCity license keys
- Maximum number of agents in an agent pool is supported
A dedicated DSL was added for some settings, e.g. for git VCS roots:
'K' prefix is dropped from class names, so KProject becomes Project in DSL.
Maven-related operations performed on the server-side are now moved to separate process
New option added to Subversion VCS root: Enable non-trusted SSL certificate; if this option is enabled, TeamCity will be able to connect to SVN servers without properly signed SSL certificate
Starting from this EAP TeamCity uses unidirectional agent-to-server connection via the polling protocol by default. If for some reason the polling protocol cannot be used, TeamCity switches to the fallback bidirectional communication via xml-rpc.
the bundled IntelliJ IDEA is updated to 2016.2 RC (162.1121.10)